The Wireless Tab - Wireless Mac Filter; Figure 5-22: Wireless Tab - Wireless Mac Filter - Linksys WRT330N User Manual

Wireless-N Gigabit Gaming Router

The WIRELESS Tab - WIRELESS MAC FILTER

Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your
network's radius.
Wireless MAC Filter
To filter wireless users by MAC Address, either permitting or blocking access, click Enable. If you do not wish to
filter users by MAC Address, select Disable.
Access Restrictions
Prevent. Click this button to block wireless access from the devices listed on this screen.
Permit. Click this button to allow wireless access by the devices listed on this screen.
MAC Address Filter List
Click the Wireless Client List button to display the Wireless Client List. It shows computers and other devices on
the wireless network. The list is shown by MAC Address. Enter the MAC addresses of the devices whose wireless
access you want to block or allow. When you have finished making changes to the Wireless Client List, click SAVE
SETTINGS to save the changes, or click CANCEL CHANGES to clear all fields and start over.
Figure 5-18: WIRELESS Tab - WIRELESS MAC FILTER
Chapter 5: Configuring the Wireless-N Gigabit Gaming Router 27
The WIRELESS Tab - WIRELESS MAC FILTER