How To Access The Web-Based Utility; Figure 5-1: Router Login - Linksys WRT330N User Manual

Wireless-N Gigabit Gaming Router
• DIAGNOSTICS. If you want to run a ping or traceroute test, then use this screen.
• FACTORY DEFAULTS. If you want to restore the Router's factory defaults, then use this screen.
• FIRMWARE UPGRADE. Click this tab if you want to upgrade the Router's firmware.
STATUS
• ROUTER. This screen provides status information about the Router.
• LOCAL NETWORK. This provides status information about the local network.
• WIRELESS NETWORK. This provides status information about the wireless network.

How to Access the Web-based Utility

To access the Web-based Utility of the Router, launch Internet Explorer or Netscape Navigator, and enter the
Router's default IP address, 192.168.1.1, in the Address field. Press the Enter key.
A screen will appear asking you for your User name and Password. Leave the User Name field blank. Enter admin
in the Password field. Then click the OK button.
Chapter 5: Configuring the Wireless-N Gigabit Gaming Router
How to Access the Web-based Utility

Figure 5-1: Router Login

static ip address: a fixed address
assigned to a computer or device
connected to a network.
subnet mask: an address code that
determines the size of the network
pppoe: a type of broadband connection that
provides authentication (username and
password) in addition to data transport
default gateway: a device that forwards
Internet traffic from your local area network
11