System Self Test - Sony SAT-W60 Service Manual

SELF TEST:
1. From home page go to [settings].
2. Go to [system test].
a. Connect a phone line to the phone jack on the back of the unit.
b. Connect both tuners to a SAT signal.
c. Make sure that the CAM card is in.
3. Press [Run Test].
This test checks both tuner's signal and that the modem detects a dial tone. Also, it checks that the CAM card is inserted and valid. Test
will show the serial number on the card.
4. Go to [Receiver Info] from the same system test menu.
This provides the following information on the box:
• Manufacturer: Sony Model number:
• Serial number:
• Client software:
• Boot rom version:
• SSID:
5. To show the date the box was last upgraded along with the version, select [Upgrades] from the SAT receiver information menu.
6. Go to the settings menu and select [Hooking Up]
7. Go to [Signal Strength]
This will show the signal strength for each tuner. It is also possible to change transponder numbers to verify both even and odd
transponders.
All manuals and user guides at all-guides.com
SECTION 3

SYSTEM SELF TEST

— 11 —
SAT-W60