Select Test Pattern; Adjust Lamp Power; Adjust Projector - Sony LSM-100 Operating Instructions Manual

Select Test Pattern

Projector Function Setup may require the use of one or
more of the internal Test Patterns.
Select Test Pattern
To select the desired test image, tap Menu, tap Function
Setup, and then tap Test Pattern. The TEST PATTERN
popup appears.
To select the desired
TEST PATTERN to be
projected, tap the
appropriate Pattern
Name.
Note: When making the
various Test Pattern
selections the Projector
Settings will remain
unchanged but the
selected test pattern will appear on the screen.
Patterns available are:
• Crosshatch and Crosshatch Inverted
• 100% White, 100% Red, 100% Blue, and 100%
Green
• Checker Flag and Checker Flag Inverted.
• OFF
Insure that OFF is selected when adjustments are
complete.

Adjust Lamp Power

To adjust LAMP POWER, tap Menu, tap Function
Setup, and then either tap, or press and hold, the
12
Function Setup
LEFT ARROW (Lower) or RIGHT ARROW (Raise)
while viewing the projected image on the screen.
Lamp Power changes are made in predefined steps.The
Indicator shows the current Lamp Power setting.
THERE IS NO "UNDO". THE CHANGES YOU MAKE
TO LAMP POWER WILL EFFECT THE CURRENT
PRESENTATION AND ANY PRESENTATION
WHENEVER THE INDICATED FUNCTION IS
RECALLED USING EITHER THE PROJECTOR
CONTROL SCREEN OR WHEN THE FUNCTION IS
ASSOCIATED WITH A CPL AS PART OF A SHOW
OR SPL.
Tap Desired Pattern
to Select

Adjust Projector

The remaining settings are in the ADJUST PROJECTOR
group where Zoom, Focus, Shift and Electric V Shift
adjustments are located.
To operate controls in the ADJUST PROJECTOR group,
you tap or press and hold the
buttons.
Zoom Adjust (Image Size)
The digital image (from the Content Element file) appears
on the imaging devices as a "flat" picture. For this reason,
LAMP POWER
Lower
Raise
ADJUST PROJECTOR
Zoom
Focus
(plus) or (minus)