System Restart Menu
The System Restart Menu, shown in Figure 6-93, resets the management agent.
• Reload Factory Defaults- Choose whether or not you want to reload the fac-
tory defaults.
• [Restart] - Restarts the Switch.
Note: When restarting the system, it will always run the Power-On Self-Test.
It will also retain all system information, unless you select to reload the fac-
tory defaults.
Select Restart to restart the Switch. Select Cancel to cancel the system restart.
103
Instant EtherFast
Figure 6-93
Series
EtherFast
Layer 3 Management 4-Port Gigabit Ethernet Switch
®
®
Exit
The Exit command under the Main Menu is used to exit the configuration pro-
gram and terminate communications with the Switch for the current session.
When using this command, you will see the screen shown in Figure 6-93. If you
need to return to the program, press Enter repeatedly.
Figure 6-93
104