Linksys Etherfast EF1704 User Manual page 36

Layer 3 management 4-port gigabit ethernet switch instant etherfast series

Hide thumbs Also See for Etherfast EF1704:

Table of Contents

Enlarged version

Static ARP Table

The Static ARP Table screen, shown in Figure 6-56, is used to specify the

static Address Resolution Protocol.

• IP Address - IP address statically mapped to a physical MAC address.

• MAC Address - MAC address statically mapped to the corresponding

IP address.

• Interface - The index number of the IP interface that will use this static

ARP entry. (Port "0" refers to the CPU.)

Select Apply to make changes. Select OK to return to the previous panel.

Select Prev Page to view the previous page. Select Next Page to view the next

page. To display a specific page, set the page number in the Page field and then

press Apply. Select Add to add a static ARP entry.

Instant EtherFast

Figure 6-56

Series

EtherFast

Layer 3 Management 4-Port Gigabit Ethernet Switch

Add Static ARP Entry

The Add Static ARP Entry screen, shown in Figure 6-57, is used to

add a static ARP entry.

•

IP Address - IP address statically mapped to a physical MAC

address.

•

MAC Address - MAC address statically mapped to the correspon-

ding IP address.

•

Interface - The index number of the IP interface that will use

this static ARP entry. (Port "0" refers to the CPU.)

Select OK to return to the previous panel. Select Cancel to cancel any changes.

Figure 6-57

Table of Contents