Linksys Etherfast EF1704 User Manual page 33

OSPF Virtual Link Configuration
The OSPF Virtual Link Configuration screen, shown in Figure 6-49,
allows you to configure the OSPF parameters.
• Area ID - This is a 32-bit number that identifies the area.
• Neighbor Router ID - The ID of the routers that have interfaces to a
common network.
• Status - Shows the interface is linked or down.
Select Apply to make changes. Select OK to return to the previous panel.
Select Cancel to cancel any changes. Select Prev Page to view the previous
page. Select Next Page to view the next page. To display a specific page, set
the page number in the Page field and then press Apply. Select Add to add a
virtual link.
59
Instant EtherFast
Figure 6-49
Series EtherFast Layer 3 Management 4-Port Gigabit Ethernet Switch
® ®
Add OSPF Virtual Link
The Add OSPF Virtual Link screen, shown in Figure 6-50, allows you
to add an OSPF virtual link.
• Area ID - This is a 32-bit number that identifies the area.
• Neighbor Router ID - The ID of the routers that have interfaces to a
common network.
Select OK to return to the previous panel. Select Cancel to cancel any changes.
Figure 6-50
60