Linksys Etherfast EF1704 User Manual page 26

Layer 3 management 4-port gigabit ethernet switch instant etherfast series
Hide thumbs Also See for Etherfast EF1704:
Table of Contents

Advertisement

Subnet Configuration
The Subnet Configuration screen, shown in Figure 6-35, allows you to spec-
ify an IP interface for any VLAN configured on this Switch that needs to
communicate with a device outside of its own group (that is, another net-
work segment).
• Intf. - This identifies the IP Interface configured.
• IP Address - The IP address associated with the specified VLAN interface.
By convention, the last three digits should be set to "254" to readily distin-
guish this device as a router port. To modify this IP interface, select it and
press Enter. The default address is 192.168.1.254.
• Subnet Mask - A template that identifies the address bits in the host
address used for routing to specific subnets. Each bit that corresponds
to a "1" is part of the network/subnet number, and each bit that
corresponds to "0" is part of the host number.
• VLAN - The VLAN associated with this IP interface.
• RIP - Routing Information Protocol for unicast routing.
• OSPF - Open Shortest Path First routing protocol.
45
Instant EtherFast
Figure 6-35
Series
EtherFast
Layer 3 Management 4-Port Gigabit Ethernet Switch
®
®
• DVMRP - Distance-Vector Multicast Routing Protocol.
• Status - Status of the VLAN IP.
Select Apply to make changes. Select OK to return to the previous panel.
Select Cancel to cancel any changes. Select Prev Page to view the previous
page. Select Next Page to view the next page. To display a specific page, set
the page number in the Page field and then press Apply. Select Add to add an
IP interface.
Modify Subnet
The Modify Subnet screen, shown in Figure 6-36, allows you to mod-
ify an IP interface.
VLAN - The VLAN associated with this IP interface.
Select - Use this option to create or modify a VLAN.
IP Address - The IP address associated with the specified VLAN
interface.
Subnet Mask - A template that identifies the address bits in the
host address used for routing to specific subnets.
Proxy ARP - Enable or disable the Proxy Address Resolution
Protocol.
Figure 6-36
46

Advertisement

Table of Contents
loading

Table of Contents