11
Slide the bottom pick roller onto its metal bar until it snaps into place.
12
Pull the pick roller gently to see if it is attached. If it pulls loose, then push it back on and turn it
counterclockwise.
Closing up
1
Reinstall trays 1, 2, and 3. See
2
Reinstall tray 4. See
3
Close tray 5. The action of closing the tray forces the metal plate back into place.
4
If you have already replaced all the items listed in the following note, you may turn the printer
on.
Note: Make sure you also follow the instructions in
transfer
Resetting the maintenance page
step 5
of
Behind trays 1, 2, and 3
step 6
of
Behind Tray 4
roller,
Cleaning the wiper
131
or more information.
for more information.
Replacing the
blade, and
counter.
fuser,
Replacing the