Lexmark T642 Technical Reference page 108

•
LRESOURCE: device:filename.filetype
"
variables. (See "Table 3-9: Printer Unique LRESOURCE Variables" on
page 3-53.)
device:filename.filetype
Values for "
device
filename
filetype
variable=value
The supported variables and values are listed in the tables beginning on
page 3-12.
Note: Variables may be modified by the DEFAULT command, except those marked
Read Only. Some variables may only be modified using the PJL SET
command. These variables cannot be modified using the DEFAULT
command. They are marked Set Only.
3-10
" is required for LRESOURCE
" are:
flash flash1 disk
, , , or
A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID
for a PCL font, and so on. The
An identifier that categorizes the file, such as
p5symset
PCL macros or
table beginning on page 3-87 for a complete list of the
supported file types. The
disk1
(case insensitive)
filename
is case sensitive.
p5macro
for PCL symbol sets. See the
filetype
is case sensitive.
PJL
for