Standard Parallel Connector; Optional Parallel Connector; Parallel Connector Pin Assignments - Lexmark T630n VE Reference Manual

Standard Parallel Connector

The standard IEEE 1284-B compliant parallel connector on the printer is a 36-pin
D-shell female receptacle, as shown.

Optional Parallel Connector

The optional IEEE 1284-C compliant parallel connector on the RS-232C
Serial/Parallel 1284-C Interface Card or Parallel 1284-B Interface Card is a 36-pin
D-shell female receptacle, as shown.

Parallel Connector Pin Assignments

"Table 8-1: Parallel Connector Pin Assignments" on page 8-9 lists interface and signal
information for connector pin assignments for the standard IEEE 1284-B and optional
IEEE 1284-C compliant connectors. In this table, "Direction" refers to the direction of
signal flow from the printer's point of view. "Return" denotes twisted pair return.
Notes:
18
36
18
36
•
Be sure to use a twisted pair cable for each signal in the interface wiring, and
always complete the connection on the return side.
8-8
Interfaces
1
19
1
19