Using The Print And Hold Function - Lexmark Optra Optra T User Manual

Using the Print and Hold Function

N : Print and Hold functions require a
OTE
minimum of 8MB available printer
memory. We recommend a minimum of
16MB available printer memory and a
hard disk.
Using the Print and Hold Function
When sending a job to the printer, you can specify in the driver that
you want the printer to hold the job in memory and not print it imme-
diately. When you are ready to print the job, you must go to the
printer and use the operator panel menus to identify which held job
you want to print.
You can use this function to:
Request extra copies of a job at a later time.
•
Delay printing a job.
•
Verify one copy before printing additional copies.
•
Print a confidential job when you are able to be at the printer
•
to retrieve it .
For more information about each of the four types of held jobs, go to
the page indicated below:
"Repeat print" on page 111
•
"Reserve print" on page 111
•
"Verify print" on page 112
•
"Confidential jobs" on page 112
•
Refer to the Administrator's Guide
106
for more detailed information.