Lexmark Optra Optra T User Manual page 35

Label guidelines
Choosing Print Materials
The printer can print on many labels designed for use with laser
printers. These labels are supplied in letter-size and A4-size sheets.
When printing on labels:
Be sure to select
•
(refer to the
PAPER MENU
information about these settings).
Do not load labels together with paper or transparencies in
•
the same paper tray; combining print materials can cause
feeding problems.
Do not load partial sheets with areas exposed by missing
•
labels; this can cause labels to peel off during printing, result-
ing in a paper jam and contamination of your printer and your
cartridge with adhesive, and could void your printer and car-
tridge warranties.
Avoid using labels that may release hazardous emissions
•
when heated.
N : Labels are one of the most difficult print materials for laser
OTE
printers. A special fuser cleaner should be used for label
applications to optimize feed reliability. Refer to the
Administrator's Guide
fuser cleaner.
35
in the
Labels PAPER TYPE
Administrator's Guide
for information on obtaining a label
menu in the
for detailed