Using the multipurpose feeder
Loading Print Materials
After loading print material in the multipurpose feeder, select the
paper source from your software application, and then select the
paper size and type from both your software application and from
the printer operator panel.
To set the printer operator panel:
1
Make sure the
PAPER SIZE
is set to the correct size paper, envelope, or other
Feeder
Size)
print material you are loading (refer to the
Guide
for detailed information about this setting).
2
Make sure the
PAPER TYPE
) is set to the correct value for the print material
Feeder Type
you are loading (refer to the
information about this setting).
3
Press
to return to
Go
N
: Software settings may override operator panel
OTE
settings.
59
for the multipurpose feeder
Administrator's
for the multipurpose feeder (
Administrator's Guide
.
Ready
(MP
MP
for detailed