Panasonic KX-TGE262C Operating Instructions Manual page 71

Problem
Caller information is not
announced.
I cannot dial the phone number
edited in the caller list.
Time on the unit has shifted.
The 2nd caller's information is
not displayed during an outside
call. (Visual Call Waiting
feature does not function.)
Using Bluetooth devices
Problem
I cannot copy phonebook
entries from a cellular phone.
TGE26x_27xC(en)_1224_ver012.pdf
Cause/solution
R The ringer volume for landline is turned off. Adjust the
ringer volume (page 40).
R The ringer volume for cellular line is turned off. Adjust the
ringer volume (page 38).
R When one handset is selected to ring for cellular calls,
other units do not announce caller information. To change
the selection, see page 18.
R The Talking Call Display feature is turned off. Turn it on
(page 40).
R The ring as cell mode is set to "On (without Talking
CID)". To change the mode, see page 18.
R The number of rings for the answering system is set to "2
rings" or "Toll saver". Select a different setting
(page 60).
R Your unit does not announce caller information while the
other devices such as headset or handsets are engaged
in a call.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance "1" or the area
code is missing). Edit the phone number with another
pattern (page 50).
R Incorrect time information from incoming Call Display
changes the time. Set the time adjustment to "Manual"
(off) (page 40).
R In order to use Call Display, Call Waiting, or Visual Call
Waiting, you must first contact your service provider/
telephone company and subscribe to the desired service.
After subscribing, you may need to contact your service
provider/telephone company again to activate this specific
service, even if you already subscribed to both Call
Display and Visual Call Waiting services.
Cause/solution
R Confirm that the cellular phone supports Bluetooth
wireless technology.
R Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R If the cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the cellular phone.
R Someone is using a cellular line or headset. Try again
later.
R Turn the cellular phone off, then turn it on and try again.
R If an entry is already stored in the unit's phonebook, the
entry cannot be copied even by selecting another group.
71
Useful Information
2013/12/24 15:43:33
71