Panasonic KX-TGE262C Operating Instructions Manual page 54

Using Bluetooth Devices
Note:
R If you cannot hang up the call using your
headset:
– press M N (STOP) on the base unit.
(KX-TGE260 series: page 3)
– press MZN on the base unit 2 times.
(KX-TG465SK series: page 3)
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone. (KX-TG465SK series:
page 3)
– during an intercom call between the base
unit and handset. (KX-TG465SK series:
page 3)
– while listening to messages recorded on
the base unit answering system.
n To switch to your headset:
Turn on the headset referring to your
headset operating instructions.
n To switch to the base unit (KX-TG465SK
series: page 3):
Press MZN on the base unit.
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set
privacy mode to off beforehand (page 42).
n While the handset is on a landline call:
To join the conversation with your headset,
turn on the headset referring to your
headset operating instructions.
n While your headset is on a landline call:
To join the conversation with the handset,
press M N.
Adjusting your headset receiver
volume
Base unit
Press MjN or MkN repeatedly while using your
headset.
54
TGE26x_27xC(en)_1224_ver012.pdf 54 2013/12/24 15:43:32