Using Bluetooth Devices; Copying Phonebook From A Cellular Phone (Phonebook Transfer) - Panasonic KX-TGE262C Operating Instructions Manual

Copying phonebook from a
cellular phone (phonebook
transfer)
You can copy phonebook entries from the
paired cellular phones or other cellular phones
(not paired) to the unit's phonebook. A cellular
phone must be compatible with Bluetooth
wireless technology.
Important:
R Your cellular phone must support Phone
Book Access Profile (PBAP) or Object
Push Profile (OPP) specification.
R If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
R If a phonebook entry includes additional
data such as a picture, that entry may fail to
copy to the base unit.
R If your cellular phone includes international
call entries, set the conversion codes
before copying (page 51).
1
Handset:
MMENUN#618
2
Handset:
To copy from paired cellular phones:
MbN: Select the desired cellular phone. a
MSELECTN
R Copied items are stored to the group
("Cell 1" or "Cell 2") which the
cellular phone is paired to.
To copy from other cellular phones
(not paired):
MbN: "Other cell" a MSELECTN a
MbN: Select the group you want to copy to.
a MSELECTN
3
When "Use the cell to
transfer phone book" is displayed:
Go to step 4.
When "Select mode" menu is
displayed:
MbN: Select "Auto" or "Manual". a
MSELECTN
"Auto": Download all entries from the
cellular phone automatically. Go to step 5.
"Manual": Copy entries you selected.
TGE26x_27xC(en)_1224_ver012.pdf
R "Select mode" menu is displayed
R Some cellular phones may require you
4
Cellular phone:
Follow the instructions of your cellular
phone to copy phonebook entries.
R For other cellular phones (not paired),
R The entries being copied are displayed
5
Handset:
Wait until "Completed" is displayed.
R You can continue copying other entries
6
Handset: MOFFN
Note:
R Some copied entries may have characters
which do not exist in the character table
(page 32). These characters can be
displayed but cannot be entered when
editing an entry.
R The unit does not support some characters.
If a copied entry includes those characters,
they are replaced with other available
characters or "H".
R If you receive a call while copying
phonebook entries, the copying procedure
stops. Try again after finishing the call.
Setting conversion codes
You must first set the following 3 dialing codes
before transferring the phonebook from your
cellular phone (each 4 digits max.).
– "International Code": An international
prefix used when you make an international
call.
– "Country Code": Your country code for
international calls.
51

Using Bluetooth Devices

only when the cellular phone supports
PBAP (Phone Book Access Profile) for
Bluetooth connection.
to perform an operation on the cellular
phone even if you select "Auto".
you need to search for and select the
base unit. The Bluetooth PIN (default:
"0000") may be required. If your
cellular phone shows PassKey
confirmation on its display, follow the
directions to proceed.
on the handset.
if necessary.
2013/12/24 15:43:32
51