Table of Contents
Advertisement
Help Guide
Data Projector
VPL-CWZ10/CXZ10
Configuring the Network Settings of the Projector
Configure the network functions from the [Setting] page.
Note
The entered value will not be applied until [Apply] is clicked.
Click the [Setting] tab and display the [Setting] page.
1
Configure [Location].
2
Configure [Host Name].
3
This host name must be the same as the Common Name (common name) of the certificate used when accessing
via https communication. For details, refer to
Configure [Obtain an IP address automatically (DHCP)] or [Specify an IP address].
4
Click [Apply].
5
Settings
[Obtain an IP address automatically (DHCP)]
Network settings are automatically assigned via the router or other device's DHCP server function. The values allocated
by the DHCP server are displayed in [IP Address], [Subnet Mask], [Default Gateway], and [DNS Server].
[Specify an IP address]
Configure the network manually.
[IP Address]: Enter the IP address of the projector.
[Subnet Mask]: Enter the subnet mask of the projector.
[Default Gateway]: Enter the default gateway of the projector.
[DNS Server]: Enter the primary DNS server of the projector.
"Configuring https
Communication."
98
Advertisement
Table of Contents
