Table of Contents
Advertisement
Help Guide
Data Projector
VPL-CWZ10/CXZ10
Attaching the Air Filter (For the Customers in India only)
The supplied accessories required vary depending on the installation method.
For installing to the floor
Remove the air filter (B) from the dust cover assembly (A), and then attach the air filter to the air filter cover
1
(C).
Pull the pull stick (D) upwards when removing the air filter from the dust cover assembly.
When attaching the air filter to the air filter cover, make sure the correct side is being attached so that the pull stick
is protruding from the air filter.
Attach the air filter cover to the unit by pushing the two levers on it.
2
For installing to the ceiling
Attach the dust cover assembly to the unit by pushing the two levers on it. (The product is pre-fitted with a dust cover
assembly when shipped.)
10
Advertisement
Table of Contents
