Table of Contents
Advertisement
Help Guide
Data Projector
VPL-CWZ10/CXZ10
Menu Operation: Input-A Signal Sel.
Set the image signal type for when Input A is selected.
Press the MENU key.
1
Select
[Connection/Power] - [Input-A Signal Sel.] - The desired setting.
2
Settings
[Auto]
Automatically choose the image signal type for when Input A is selected.
[Computer]/[Video GBR]/[Component]
The selected image signal type will be applied.
Note
Even if [Auto] is set, the image may not be optimized depending on the input. If this occurs, configure manually in accordance
with the connected device.
5-014-280-13(1) Copyright 2020 Sony Corporation
79
Advertisement
Table of Contents
