Table of Contents
Advertisement
Help Guide
Data Projector
VPL-CWZ10/CXZ10
Menu Operation: Remote Start
Configure Remote Start. Setting [Remote Start] to [On] will turn on the projector by sending special commands even
when [Standby Mode] is set to [Low].
Press the MENU key.
1
Select
[Connection/Power] - [Remote Start] - [On] or [Off].
2
Selecting [On] will allow you to supply power from the computer and so on to the projector when in a network-
connected environment.
Note
It is necessary to configure the network settings correctly and connect the projector to the network in advance.
When supplying power to the projector using the Remote Start function, it is necessary to send special commands from the
computer. Consult with qualified Sony personnel for details.
Setting [Remote Start] to [On] will increase standby power consumption during Standby Mode.
Related Topic
Menu Operation: Network Setting
5-014-280-13(1) Copyright 2020 Sony Corporation
81
Advertisement
Table of Contents
