Table of Contents
Advertisement
Help Guide
Data Projector
VPL-CWZ10/CXZ10
Uses for Network Features
Connecting a projector to a network allows you to do the following.
Use the projector with only necessary functions enabled.
Confirm the current projector state using a web browser.
Operate the projector remotely using a web browser.
Receive a report from the projector via e-mail.
Configure network settings for the projector.
Perform control using various types of network surveillance and control protocol (Advertisement, ADCP, PJ Talk, PJ
Link, AMX DDDP (Dynamic Device Discovery Protocol), Crestron RoomView).
Reset the network settings.
Set the date and time.
Update the software.
Use https communication.
Note
When connecting the projector to a network, consult the network administrator. Also, use a network environment with security
measures in place.
When using the projector upon connecting it to a network, open the projector's control panel via a network and change the factory
settings of the access control settings. We also recommend that you change your password periodically.
Once you have finished configuration via the browser, close the browser to log out.
Please note that the images used in the explanation are for reference only. Some images may differ depending on what model
you are using.
Supported web browsers are Internet Explorer (version 11 or later), Safari, and Chrome.
The only display language available is English.
When accessing the projector from a computer, if the browser is set to "use a proxy server," click the checkmark and configure it
to not use a proxy server.
Related Topic
Operating the Control Panel
Using the E-mail Report Function
Configuring the Network Settings of the Projector
Resetting the Network Settings
Setting the Date and Time
Using the Software Update Function
Configuring https Communication
5-014-280-13(1) Copyright 2020 Sony Corporation
92
Advertisement
Table of Contents
