Printing On Specialty Media; If You Need More Information; Canceling A Print Job; Common Printer Messages - Lexmark C752 Quick Reference

6
Place the paper against the back left corner of the tray, print side down.
Do not load bent or wrinkled print media.
7
Close the tray.
Make sure the tray is pushed completely into the printer.
Note: Do not exceed the maximum stack height. Overfilling the tray may
cause paper jams.
Loading the optional envelope tray
For information about loading the optional envelope tray, refer to the
publications CD that came with the printer.
Set Paper Type and Paper Size
If you have set Paper Type and Paper Size to the correct values, any trays
containing the same type and size of paper are automatically linked by the printer.
Note: If the type of the media you are loading is the same as the media
previously loaded, you do not need to change the Paper Type
setting.
To change a Paper Type or Paper Size setting:
1
Press Menu until you see Paper Menu, and then press Select.
2
Press Menu until you see Paper Type (or Paper Size), and then press
Select.
Tray 1 Type (or Tray 1 Size) appears on the second line of the display.
3
Press Select if you want to change the Tray 1 Type (or Tray 1 Size) setting
or press Menu to scroll to another source.
4
Press Menu to scroll through a list of possible paper types (or sizes).
5
When you see the correct paper type (or size), press Select to save the
setting as the default.
6
Press Go to return the printer to the Ready state.

Printing a menu settings page

To verify Paper Size and Paper Type settings, and check installed options and
memory, print a menu settings page:
1
Press Menu until you see Utilities Menu, and then press
2
Press until you see Print Menus, and then press
Menu
settings page prints.

Printing on specialty media

(transparencies, labels, etc.)
Follow these instructions when you want to print on media such as transparencies,
card stock, glossy paper, labels, or envelopes.
1
Load the print media as specified for the tray you are using. See
or other print media
2
From the printer operator panel, set the Paper Type and Paper Size
according to the print media you loaded. See
Size for help.
3
From the computer's software application, set the paper type, size, and
source according to the media you loaded.
a
In your word processor, spreadsheet, browser, or other application,
select File Print.
b
Click Properties (or Options, Printer, or Setup, depending on the
application) to view the printer driver settings.
c
Select the tray containing the specialty media from the Form Source list
box.
d
Select your media type (transparencies, envelopes, and so on) from the
Media Type list box.
e
Select the size of the specialty media from the Form Type list box.
f
Click OK, and then send your print job as usual.

Canceling a print job

To cancel a print job after it has started printing:
1
Press until you see Job Menu, and then press
Menu
2
Press Menu until you see Cancel Job, and then press

Common printer messages

Message
Change <x>
The printer is requesting a
different size or type of paper
than what is loaded.
2<XX> Paper Jam
The printer detects a paper jam.
Load Manual
The printer is ready for paper to
be inserted into the
multipurpose feeder.
Waiting
The printer has received data to
print but is waiting for a
command or additional data.
Select .
. The menu
Select
Load paper
for help.
Set Paper Type and Paper
.
Select
Select .
Actions
• Remove the currently loaded paper from the
specified tray, and then load the requested
paper.
• Press Select to clear the message and print on
the media currently loaded in the tray.
• Cancel the current job.
Clear the paper path.
Refer to the publications CD or Clearing Jams card
for more information.
• Load the multipurpose feeder with the paper
specified on the second line of the display.
• Press Select or Go to ignore the manual feed
request and print on paper already installed in
one of the paper trays.
• Cancel the current job.
• Press Go to print the contents of the buffer.
• Cancel the current job.
Message Actions
• Wait for the message to clear.
Flushing Buffer
The printer is discarding the • Sometimes this message means the driver data
current print job. did not match what the printer was expecting. If
the situation recurs, try printing from another
printer driver.
Replace the image transfer unit and the fuser.
ITU/Fuser Maint
The image transfer unit and Refer to the publications CD for information about
fuser require maintenance. ordering and replacing these maintenance items.
80 Fuser Maintenance Replace the fuser.
The fuser needs replacing. Refer to the publications CD for information about
ordering and replacing the fuser.
Replace the image transfer unit.
83 ITU Maintenance
The image transfer unit needs Refer to the publications CD for information about
replacing. ordering and replacing the image transfer unit.

If you need more information

•
Refer to the Setup Guide or the publications CD that came with your printer
for helpful information about using and maintaining your printer.
• Contact your administrator or Help desk if you have questions about network
printing.
P/N 15G1981 © Copyright Lexmark International, Inc.
E.C. 3G0049 All rights reserved.
Printed in China
03/03