Lexmark X820E Setup Manual page 40

Mfp option
Hide thumbs Also See for X820E:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
New Zealand Telecom
Warning Notice
rning Notice
Warning! g!
No '111' or other
calls can be made from this
device during a main power
failure.
South Africa
Telecommunications
32
Notices
The grant of a Telepermit for any item of terminal equipment indicates
only that Telecom has accepted that the item complies with minimum
conditions for connection to its network. It indicates no endorsement
of the product by Telecom, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item will work correctly in
all respects with another item of Telepermitted equipment of a
different make or model, nor does it imply that any product is
compatible with all of Telecom's network services.
This equipment may provide for the effective hand-over of a call to
another device connected to the same line.
Some parameters required for compliance with Telecom's Telepermit
requirements are dependent on the equipment (PC) associated with
this device. In order to operate within the limits for compliance with
Telecom's Specifications, the associated equipment shall be set to
ensure that calls are answered between 3 and 30 seconds of receipt
of ringing.
If a charge for local calls is unacceptable, the Dial button should NOT
be used for local calls.
Only the 7-digits of the local number should be dialed from your
telephone. DO NOT dial the area code digit or "0" prefix.
This equipment is not capable under all operating conditions of
correct operation at the higher speeds for which it is designed.
Telecom will accept no responsibility should difficulties arise in such
circumstances.
The decadic (or pulse) dialing on this device is unsuitable for use on
the Telecom network in New Zealand.
This modem must be used in conjunction with an approved surge
protection device when connected to the PSTN network.
Notice
3 and 30 seconds of receipt
mber should be dialed from your
which it is designed.
PSTN network.

Advertisement

Table of Contents
loading

This manual is also suitable for:

X7500 mfpX820e mfp

Table of Contents