Lexmark X820E Setup Manual page 38

Industry Canada CS- S-
03 Notice
CAUTION!
Do not make such
connections. Contact the
appropriate electric inspection
authority, or electrician, as
appropriate.
Network compatibility
30
Notices
— Telephone number of the sending machine or such
The Industry Canada label identifies certified equipment. This
certification means that the equipment meets certain
telecommunications network protective operational and safety
requirements in the appropriate Terminal Equipment Technical
Requirements documents. The Department does not guarantee the
equipment will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection. The customer should be
aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may
give the telecommunications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines, and internal metallic
water pipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
The Ringer Equivalence Number (REN) of this device is 0.4. Ringer Equivalence Number (REN) of this device is 0.4.
The Ringer Equivalence Number (REN) assigned to each terminal
device provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination of
an interface may consist of any combination of devices subject only to
the requirement that the sum of the RENs of all the devices does not
exceed 5.
This equipment uses the following Jacks: CA11A.
atibility
This equipment has been designed, tested, and found to be compliant
with the European technical standard TBR 21 for pan-European
notices
business, other entity, or individual
y. The equipment must also be installed
y consist of any combination of devices subject only to
wing Jacks: CA11A.
European technical standard TBR 21 for pan-European
Equipment Technical