Lexmark X820E Setup Manual page 9

Modifying your ur
high capacity feeder
or base cabinet
Note:
If you prefer not to disassemble
the printer, use a 7/32 socket wrench to
reach under the base cabinet and
remove the stabilizer feet. zer feet.
Your printer supports either an optional
high capacity feeder or an optional base
cabinet. You need one of these options
for your printer to fit properly into the
stand.
Whether you have a printer that you
need to set up, or you already have an
installed printer, you need to modify your
high capacity feeder or base cabinet.
If you haven't set up your printer yet,
y feeder
unpack the high capacity feeder or base
cabinet and remove any packing
cabinet
materials. Be sure to remove any foam
and tape from inside. Save the carton
and packing materials if you need to
repack the option later.
You need a Phillips screwdriver to modify
and install the high capacity feeder.
If you have already set up your printer,
you need to disassemble it and remove
the high capacity feeder or base cabinet.
Refer to "Removing printer parts" on the
printer publications CD for information on
how to do this.
Phillips screwdriver to modify
Set up your printer
1