Finishing Menu - Lexmark X646E Menus And Messages Manual

Finishing Menu

Use these menu items to set the user default settings for all jobs. Printing from an application may override user default
settings.
Menu item Purpose
Duplex Sets duplex (two-sided) printing as
the default for all print jobs.
Note: This menu item appears if an
optional duplex unit is installed.
Duplex Bind Defines the way duplex pages are
bound, and how the printing on the
back of the sheet (even-numbered
pages) is oriented in relation to the
printing on the front (odd-numbered
pages).
Note: This menu item appears if an
optional duplex unit is installed.
Copies Sets the number of copies needed
as the MFP user default value.
Using the MFP menus
Values and descriptions
Off*
On
Long Edge*
Assumes binding along the long edge of the page (left edge for
portrait orientation and top edge for landscape orientation).
The following illustration shows long-edge binding for portrait
and landscape pages.
Binding
Back of
sheet
Portrait
Short Edge
Assumes binding along the short edge of the page (top edge
for portrait orientation and left edge for landscape orientation).
The following illustration shows short-edge binding for portrait
and landscape pages.
Back of
sheet
Front of
next sheet
Portrait
1–999 (1*)
Settings
77
Prints on one side of the print media.
Prints on both sides of the print media.
Front of
next sheet
Binding
Binding
Binding
Back of
sheet
Landscape
Values selected from the application or
printer driver always override values
selected from the control panel.
Back of sheet
Front of next
sheet
Landscape
Front of
next sheet