Bin Setup - Lexmark X646E Menus And Messages Manual

Bin Setup

This menu item is used to specify the output bin where the printed print media goes. This menu item only appears if at least
one optional output bin is installed, and only installed output bins appear as values.
Menu item Purpose
Output Bin Specifies the default bin for
printed print media.
The number of bins listed are
based on the number of bins
installed.
Configure Bins Determines which output bin(s)
the MFP uses for a particular
job.
Using the MFP menus
Values and descriptions
Standard Bin*
Bin 1
Bin 2
Bin 3
Bin 4
Bin 5
Bin 6
Bin 7
Bin 8
Bin 9
Bin 10
Mailbox*
Link
Link Optional
Mail Overflow
Type Assignment
Paper Menu
28
If a user-defined name is available
for an output bin, then the name
appears instead.
Note: If multiple output bins are
assigned the same name, the
name only appears once in the
Output Bin value list.
Sends print jobs to the output bin
designated for that user.
Links two or more output bins
together as though they were one
large bin. When one linked output
bin is full, the MFP starts filling the
next linked bin and continues with
each additional linked bin.
Note: The Link Optional value only
appears when at least two optional
output bins are installed.
Sends print jobs to the output bin
designated for the specific user
until it is full, and then sends jobs to
the designated overflow bin.
Links all optional output bins as
though they were one large bin,
while leaving the standard output
bin individually addressable.