Font Capture Menu Options; Capture Fonts; Remove Fonts - Lexmark X644E User Manual

3.10 FONT CAPTURE Menu Options

The FONT CAPTURE menu only displays if a user flash memory or a disk is installed in the printer.
In the following an asterisk "*" indicates the default factory value. The selected value for each of these
options can be printed; see Printing the Menu Settings Page (printers) on page 15 or Printing the Menu
Settings Page (MFPs) on page 18.

3.10.1 Capture Fonts

This option controls the capturing of eligible bitmap fonts (LF1 format), eligible outline fonts (LF3
format), and TrueType fonts downloaded from the host. If the IPDS job specifies a font that is a
permanent resident printer font, or a font that has already been captured, the host selects the resident or
captured font and does not download the font. This saves time and network traffic. See Working with
Captured Fonts on page 70 for further details.
Important:
You should always check your font licensing information before making a font eligible for capture.
Disable* No fonts are captured. Fonts already captured remain in the printer.
Save To Disk Capture fonts and store them on the printer disk. A disk with sufficient space has to be
available in order to store captured fonts. This setting displays only if a disk is installed.
If the disk is password protected, no fonts will be captured. To capture fonts, remove the
password protection, capture the fonts, and password protect the disk again.
Save To Capture fonts and store them in user flash memory. A flash with sufficient memory has to
Flash be available in order to store captured fonts. This setting displays only if a flash is
available.
If the flash is password protected, no fonts will be captured. To capture fonts, remove the
password protection, capture the fonts, and password protect the flash again.

3.10.2 Remove Fonts

This function is used for the removal of all captured fonts stored on a user flash or disk.
If the flash or disk is password protected, the message Flash Protected, Fonts Not Erased or Disk
Protected, Fonts Not Erased displays. If both the flash and the disk are password protected, the
messages appear after each other. Remove the password protection to allow removal of the fonts.
Removing captured fonts from the flash removes the fonts but does not free the memory for other usage.
Flash memory can ONLY be freed by formatting the flash. Formatting deletes all fonts stored in the flash.
No* Cancel action. No fonts are removed.
Yes Remove all captured fonts. This includes all fonts stored on both disk and flash.
49