Paper Handling Menu - Option Descriptions; Ipds Blank; Offset Stacking; Universal Size - Lexmark X644E User Manual

3.5 PAPER HANDLING Menu – Option Descriptions
In the following an asterisk "*" indicates the default factory value. The selected value for each of these
options can be printed; see Printing the Menu Settings Page (printers) on page 15 or Printing the Menu
Settings Page (MFPs) on page 18.
3.5.1 IPDS Blank Pages
This option determines if blank pages in IPDS jobs are printed.
Print* Print all IPDS pages.
Do Not Print Skip printing of blank IPDS pages. Duplex pages are skipped only if both sides are blank.

3.5.2 Offset Stacking

This option controls the offset stacking function. It is only displayed when offset stacking is supported in
the printer standard bin or when an optional finisher with offset stacking capability is installed. Offset
stacking is only available in selected bins and may be limited to selected media.
Bin selection has a higher priority than offset stacking commands in the IPDS job. The job must be routed
to a bin that supports offset stacking and have offset stacking specified in the job before offset stacking
will be performed.
See section 5.1 on page 53 for additional information on offset stacking.
Host Controlled*
Disabled

3.5.3 UNIVERSAL SIZE

The IPDS emulation uses the paper size setting specified in the printer menu to determine the size loaded.
The paper size is returned to the host. A printer paper size of "Universal" is displayed in the printer menu
when a non-standard size paper is detected in an auto size sensing tray or is selected as the paper size
loaded into a non-size sensing tray or feeder.
This option allows you to specify the physical paper size returned to the host when a non-standard paper
size is loaded. The paper size is specified in 300 dots per inch.
Important: A 34 Short Paper, 34 Wrong Paper Size, or paper jam error may be displayed if printing
occurs past the length of the physical paper. You should specify the actual paper size to avoid errors.
Offset stacking is controlled by the commands received in the IPDS job.
Offset stacking is not performed. Offset stacking commands received in the
IPDS jobs are ignored.
33