MSI MS-5153 Manual page 99

Table of Contents

Advertisement

CHAPTER 5
CHAPTER 5
CHAPTER 5
CHAPTER 5
CHAPTER 5
5.1 Install MS-5153 Audio Drivers
1. Driver
1.1 Install Enhance Audio Drivers for Windows
After installing Windows
auto-detect the changes in your hardware configuration, and will
show you a message. To get a higher performance, you need to
install the Driver.
To install MS-5153 Enhance Audio Drivers, follows the steps below:
Step 1: Power up your computer and boot to Windows
Step 2: Insert the I430tx CD into your CD-ROM
Step 3: Once Windows
will appear. Select the item "Creative Drivers Disk" and
Click "OK".
Step 4: The "Install from Disk" dialog box will appear. Select the
drive of your CD-ROM (such as D: or E:). Then, look for
VIBRA16>WIN95>DRV folder and click "OK".
Step 5: Once you have installed your sound card, you can check for
it by going into Control Panel and select the System icon.
Under Device Manager, select the sound, video and game
controllers from the device list. The Creative Sound Blaster
16 Plug and Play and Creative Gameport Joystick icons will
appear, showing that Windows
board sound.
AUDIO INSTALLATION GUIDE
AUDIO INSTALLATION GUIDE
AUDIO INSTALLATION GUIDE
AUDIO INSTALLATION GUIDE
AUDIO INSTALLATION GUIDE
®
95 in the mainboard, Windows
®
95 is up, a "New Hardware Found" message
®
95 had detected your on-
5-2
®
95
®
95 will
®
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tx3

Table of Contents