MSI MS-5153 Manual page 97

CHAPTER 4 CHAPTER 4
CHAPTER 4 CHAPTER 4 CHAPTER 4
Description of the item on screen follows:
CPU Thermal Setup
This is for setting the CPU temperature. You must leave this on the
default setting of 60.
CPU Current Temperature
This will show the CPU Current temperature.
Thermal Slow Clock Ratio
This will show the thermal slow clock ratio.
CPU Temperature Display
If set to yes, during boot-up this will show the CPU temperature.
System Temperature Set
This is for setting the system temperature. You must leave this on
the default setting of 50.
System Current Temperature
This wil show the current temperaure of the system.
Chassis Intrusion(reserved)
During Enabled, the on-board chassis intrusion sensor will monitor
any intrusion on the chassis.
Power FAN Message Display/CPU FAN Message Display
If set to yes, if any of the fans malfunction, then it will show
warning messages.
System Temperature Display
If set to yes, if the temperature gets too high or too low, this will
show warning messages.
®
AMI AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE BIOS USER'S GUIDE
AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE
4-26