Table of Contents
Advertisement
CHAPTER 2
2.11-2 Power On/Off Switch: JRMS1/JRMS2
Connect to a 2-pin push button switch. Every time the switch is shorted by
pushing it once, the power supply will change its status from OFF to ON.
During ON stage, push once and the system goes to sleep mode: pushing it
more than 4 seconds will change its status from ON to OFF. If you want to
change the setup, you could go to the BIOS Power Management Setup.
Note: The two switch as provided by the mainboard is just for your
convenience, so you can use any of them. The two switches have
the same feature.
HARDWARE INSTALLATION
JRMS2
JRMS1
2-23
Advertisement
Table of Contents
