Status Readback Commands - Lexmark X422 Technical Reference Manual
Lexmark x422: reference guide
Hide thumbs
Also See for X422:
- Service manual (268 pages) ,
- User reference manual (250 pages) ,
- Setup manual (82 pages)
Table of Contents
Advertisement
Status Readback Commands
Applications can request configuration and status information from the printer using
the Status Readback commands. In addition, the printer can also be instructed to send
unsolicited status information back to the host computer when asynchronous events
occur, such as a memory error or a paper jam.
To determine which commands your printer supports, see "Table B-8: Status
Readback Commands" on page B-13.
DINQUIRE Command
This command is used to query the default setting (NVRAM) of the specified
environment variable.
Syntax:
Response Syntax:
where:
The
be queried. The variables supported are listed in the tables beginning on
page 3-12.
•
A
in the tables "Common Variables for Both Printer Languages" on page 3-12,
and "Printer Unique Variables for Both Printer Languages" on page 3-19.
•
is used with variables specific to PCL emulation. (See the tables
"Common Variables for PCL Emulation" on page 3-48, and "Printer Unique
Variables for PCL Emulation" on page 3-49.)
3-54
parameter specifies the type of PJL variable to
parameter is not required for variables listed
PJL
Advertisement
Table of Contents
