Can Receive But Not Send Faxes - Lexmark X5070 User Manual

Check the Auto Answer button
If the Auto Answer light is on:
•
The printer will answer after the preset number of telephone rings.
•
If you are using a distinctive ring, see "Setting the distinctive ring" on page 60.
Check ink
Check the ink levels, and install a new cartridge if necessary.
Check whether Fax Forwarding is selected
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Fax Setup appears.
4
Press .
5
Press or repeatedly until Ringing and Answering appears.
6
Press .
7
Press or repeatedly until Fax Forward appears.
8
Press .
9
Press or repeatedly to view the current Fax Forwarding setting.
10
To turn off Fax Forwarding, press
11
Press to save the setting.

Can receive but not send faxes

These are possible causes and solutions. Try one or more of the following:
Check mode selection
To make sure the printer is set for faxing, press Fax Mode.
Check document placement
Load the original document facedown in the ADF.
Check the Dial Prefix setting
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Fax Setup appears.
4
Press .
5
Press or repeatedly until Dialing and Sending appears.
6
Press .
or repeatedly until Off appears.
114