Lexmark Pro715 User Manual page 11

Use the
6 ADF output tray
7 PictBridge and USB port
8 Printer control panel
9 Paper tray
10 Paper stop
11 Paper exit tray
21
Use the
12 Scanner unit
13 Ink cartridge access area Install, replace, or remove the ink cartridges.
14 Ethernet port
15 USB port
16 LINE port
17 EXT port
18 Power supply with port
19 Duplex unit
To
Hold documents as they exit from the ADF.
Connect a PictBridge‑enabled digital camera or a flash drive to the printer.
Operate the printer.
Load paper.
Catch the paper as it exits.
Hold paper as it exits.
15
12
13
14
20
To
Access the ink cartridges.
Connect your printer to a computer, a local network, an external DSL, or a cable
modem.
Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
Connect the printer to an active telephone line (through a standard wall jack, DSL filter,
or VoIP adapter) to send and receive faxes.
Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer, and
if this connection method is supported in your country or region.
Note: Remove the plug to access the port.
Connect the printer to a power source using the power cord.
• Print on both sides of a sheet of paper.
• Remove paper jams.
About your printer
11
16
17
<
<
19
18