Data Label - Electrolux TD6-14 Installation Manual

48
• Loosen the measuring branch screw (2) 1/4 turn; connect a manometer to the measuring branch.
• Connect the power to the machine and select a program with heat.
• Start the machine.
• Set the correct nozzle pressure according to the table on setting screw (4) under the cover screw (3).
• Check that the gas flame burns evenly.
• Mount the cover screw (3).
• Tighten the screw (2) when the adjustments are done.
• Remount the back panel.

9.7 Data label

When the machine is to be converted to another gas type, the data label at the rear of the machine must be updated
in order for the data to be correct.
Place the data label enclosed in the conversion kit on top of the data label as shown below. If there are more than
one data label, select the label with the correct country code and gas type.
WXXXXX
9868XXXXXX
Product no.:
09XXX / 99XXXXX
Serial no.:
09XXXXXX
OC:
432XXXXXX,5XXX
Program:
WN3...WN3XXXX
Type:
WXXXXX
9868XXXXXX
Product no.:
09XXX / 99XXXXX
Serial no.:
09XXXXXX
OC number:
X kg
Capacity:
WN3...WN3XXXX
Type/Model:
380
Voltage:
1,6kW
Rated Input:
Qn(Hs)
AT,BG,CZ,DK,EE,FI,GR,HR,HU,IS,IE,IT,LV,
LT,NO,PT,RO,SK,SI,ES,SE,CH,TR : l2H (20MBAR)
DE,PL,LU : l2E (20/25MBAR)
GB : l2H (20MBAR)
MANIF. PRESS.:
NATURAL GAS : G20
(INLET PRESS.: 20-25 MBAR, CAL. VAL. 37780 KJ/M3)
For safety reasons use only genuine spare parts.
WXXXXX
9868XXXXXX
Product no.:
09XXX / 99XXXXX
Serial no.:
09XXXXXX
OC:
432XXXXXX,5XXX
Program:
WN3...WN3XXXX
Type:
Installation manual
10XX 432XXXXXXXX
10XX
Date(YYMM):
~
400V 3N 50Hz
10A
13.5 KW PIN NO.
PIN NO.
8 MBAR INJECTOR:Ø
Made in Sweden
Electrolux Professional AB
341 80 Ljungby, Sweden
10XX 432XXXXXXXX
13.5 KW
Qn(Hs)
BE,CH,CY,CZ,ES,FR,GR,IE,IT,
LT,LU,LV,PT,SK,SI : l3+ (28-30/37MBAR)
GB : l3+ (28-30/37MBAR)
MANIF. PRESS.: 28-30/37MBAR
LPG GAS: G30/G31
(INLET PRESS.: 28-30/37 MBAR, CAL. VAL. 125810/95650 KJ/M3)
2575DM30487
359BQ491
3.30 MM
PIN NO. 2575DM30487
PIN NO. 359BQ491
INJECTOR:Ø 1.80 MM
fig.7120
fig.X02292