CNET CWP-905 User Manual page 55

TX Power
Idle Time
No forwarding
among wireless
clients
Hide SSID
Allow BW
40 MHz
Default
Apply
To exit, click 'X' button at the upper-right corner of configuration
window.
know what will be affected.
You can select the wireless output power here.
Please select a proper output power setting according to your
actual needs. You may not need 100% of output power if other
wireless clients are not far from you.
Select the idle time of your wireless network card. Default value is
300. Do not modify this value unless you know what will be
affected.
Check this box and wireless clients will not be able
to share data with each other.
Check this box and the SSID will not be broadcasted to the public.
Your wireless clients must know the exact SSID to be able to
connect to your computer.
This option is useful to enhance security level.
Check this box to allow BW 40MHz capability.
Click this button to restore all settings in this page back to default
value.
Click this button to activate current settings.
55