CNET CWP-905 User Manual page 54

Wireless Mode
Use Mac
Address
Security
Setting
Country
Region Code
Wireless
Protection
Beacon(ms)
channels available here will vary depends on the setting of
'Country Region Code'.
Please select the wireless operating mode. You can limit the type
of wireless client to 802.11b or 802.11g only, or allow 802.11b/g,
and 802.11b/g/n clients. It's safe to select '802.11 B/G/N mix' to
allow all kinds of wireless client to connect to your computer, unless
you want to limit the type of wireless client allowed to connect to
your computer.
Click this button to use the MAC address of the
wireless card as SSID. A prefix of 'AP' will be added.
Set the security options (wireless data encryption)
Please refer to chapter 3-2 'Security Settings' for details.
Please select the country code of the country or
region you live. Available options are 0-7, which will affect the
available wireless channels you can use:
0: FCC (US, Canada, and other countries uses FCC radio
communication standards)
1: ETSI (Europe)
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISERAL (Channel 3 to 9)
7: ISERAL (Channel 5 to 13)
Wireless protection will prevent data collision when
there are both 802.11b and 802.11g clients. You can select 'Auto' to
let configuration utility to decide to use wireless protection or not.
You can also select 'ON' or 'OFF' to force the use of wireless
protection or not.
You can define the time interval that a beacon signal should be
send. Default value is 100. Do not modify this value unless you
54