Wps Configuration - CNET CWP-905 User Manual

2.7 WPS Configuration

Wi-Fi Protected Setup (WPS) is the latest wireless network technology which makes wireless
network setup become very simple. If you have WPS-enabled wireless access point, and you
want to establish a secure connection to it, you don't have to configure the wireless access
point and setup data encryption. All you have to do is go to the WPS setup page of this
wireless card, click a button, and then press a specific button on the wireless access point you
wish to establish a secure connection - just three simple steps!
For older wireless access points, it's possible to perform a firmware upgrade to become a
WPS-enabled access point. Since they may not have a hardware button to press for WPS
setup, you can use an alternative WPS setup method – input the pin code. Every
WPS-compatible wireless network card comes with a unique WPS pin code; you can just input
the code to wireless access point, and the wireless access point and wireless network card will
do the rest for you.
This wireless network card is compatible with WPS. To use this function, the wireless access
point you wish to connect to must support WPS function too. Now, please follow the following
instructions to establish secure connection between WPS-enabled wireless access point and
your wireless network card:
43