Display Brightness Adjustment; Self Clean Operation - Mitsubishi Heavy Industries SRK15ZTL-W User Manual

Display brightness adjustment

■ This function can be used when it is necessary to adjust the brightness of unit display.

SELF CLEAN operation

■ SELF CLEAN operation should be run after AUTO, COOL and DRY operation to remove the moisture from inside of the indoor unit and
control the growth of mold and bacteria. (Including when stopped by the TIMER)
1
Select the Display brightness adjustment by pressing
the MENU switch.
2
Select the brightness level by pressing " or
TIMER)" button.
100 %
(Original)
3
Press the ON/OFF button.
1
Select the SELF CLEAN operation by pressing the
MENU switch.
2
Select SELF CLEAN on by pressing " or
TIMER)" button.
(SELF CLEAN off)
3
Press the ON/OFF button.
NOTE
 Two hours later, the air-conditioner stops SELF CLEAN operation
automatically. To stop the air-conditioner immediately, press the ON/OFF
button.
 SELF CLEAN operation is not operated after HEAT, FAN and ALLERGEN
CLEAR operations have finished.
 The indoor unit fan runs for about two hours in SELF CLEAN operation.
 The RUN light illuminates during SELF CLEAN operation (3 seconds ON,
1 second OFF).
 Pressing the SLEEP button, ALLERGEN CLEAR button or NIGHT
SETBACK button during SELF CLEAN operation cancels the SELF
CLEAN operation and then the unit is set to SLEEP, ALLERGEN CLEAR
or NIGHT SETBACK operation.
 This is not a function for removing mold, germs or grime that have
already adhered to the unit.
EN-24
50 % 0 %
(Turned off)
(TEMP/
(SELF CLEAN on)
(TEMP/