Download Print this page

Function - Ford BRONCO 2023 Quick Reference Manual

Advertisement

F UNC TI ON
P R E - COL LI S I O N ASS I ST *
If your vehicle is rapidly approaching a
stationary vehicle, a vehicle traveling in
the same direction as yours, or a
pedestrian within your driving path, the
system is designed to provide three
levels of functionality:
Alert: When active, a flashing visual
warning displays and an audible
warning tone sounds.
Brake support: Assists the driver in
reducing collision speed by preparing
the brake system for rapid braking.
Brake support does not automatically
apply the brakes, but if the brake pedal
is pressed even lightly by the driver,
brake support could add additional
braking up to full force.
Automatic emergency braking:
Automatic emergency braking may
activate if the system determines that a
collision is imminent.
*if equipped
EVAS IV E STEER IN G ASSIST*
If your vehicle is rapidly approaching a road
user, evasive steering assist helps you steer
around the road user.
After you turn the steering wheel in an
attempt to avoid a crash with the road
user, the system applies additional steering
torque to help you steer around the road
user. After you pass the road user, the
system applies steering torque when you
turn the steering wheel to steer back into
the lane. The system deactivates after you
fully pass the road user.
Note: Evasive steering assist does not
automatically steer around a road user. If
you do not turn the steering wheel, evasive
steering assist does not activate.
LA NE KEE PIN G SYSTEM *
When you switch the system on and the
system detects an unintentional drift out
of your lane is likely to occur, the system
notifies or assists you to stay in your lane
through the steering system and
instrument cluster display. Depending on
the feature operation mode you select, the
system provides a warning by vibrating the
steering wheel (Alert Mode) or steering
assistance (Aid Mode) by gently counter
steering your vehicle back into the lane.
The system can also provide both warning
(vibrating the steering wheel) and steering
assistance (gently counter steering your
vehicle back into the lane) while Aid+Alert
mode is selected.
To change the lane keeping system mode,
use the touchscreen:
1. Select Driver Assistance.
2. Select Lane Keeping System.
3. Select Mode.
4. Select a setting.
You can switch the system on or off by
pressing the
button on the steering
wheel. Refer to the Lane Keeping System
chapter of your Owner's Manual for system
operation and limitations.
FRO N T AND REAR
PARKI N G AIDS*
The sensors warn you if there is an object
in front of or behind the vehicle. The rear
sensors are active only when the
transmission is in reverse (R). The front
sensors are active when the gearshift is in
any position other than park (P) and the
vehicle is traveling at a low speed. As the
vehicle moves closer to the obstacle, the
rate of the audible warning increases.

Advertisement

loading