Advertisement
RE M OVA BL E D O O RS
For off-road use only. Removing the doors may impact the
safety equipment performance.
1. Fully open the windows on the doors being removed, then
switch the vehicle off.
2. Fold the mirrors completely forward before removing the
front doors.
3. Fully open the door being removed.
4. To release the door harness connector, open the connector
door. Pull the connector straight out.
5. Locate the fender protector in the tool pouch and install it
over the fender edge near the top door hinge.
6. To release the door harness connector, open the connector
door and pull the connector straight out.
7 Make sure the connector door is seated in the closed position.
8. We recommend that you use a door storage bag on the door
being removed. Make sure the bag is fully secured. The bag
must contain the edge and corners of the door to prevent
accidental door damage before proceeding with the removal
of the door.
9. Locate the tool pouch and use the hex tool to remove the
lower hinge bolt. Remove the upper hinge bolt. Store the
hinge bolts in the pocket of the tool pouch.
10. Locate the lower lift handle. Use the door handle as the upper
lift handle.
11. With the help of another person, lift the door vertically to
separate it from the vehicle. Use caution when removing the
doors as they are heavy. The doors should be stored out of
the elements to prevent damage.
12. To remove additional doors, repeat Steps 3 - 11.
13. Make sure you return the hex tool to the tool pouch and
secure it in the vehicle.
12. Return the mirrors to the driving position.
PAGES
18
19
Advertisement
