Bushnell Elite Tactical LMSS2 Owner's Manual page 7

Horus Tremor4™ (T4) Spotting Reticle
SPECIFICATIONS
KEY FEATURES
• The Tremor4 reticle is designed to be used with the Tremor3™ or Tremor2™ riflescope reticle, allowing the shooter and spotter to
view a target with the same common frame of reference.
• Very fine reticle to aid in precise aiming at high power and distant ranges. Refined "chevron" mil markers subtend to 0.1 mils.
• Patented Wind Dots allow for fast and accurate wind holds.
• Spotting reticle for observational measurement.
• Mil line across the center of the reticle grid is to facilitate target measurement, target speed estimation, Second Shot Correction, and
to help with target location.
• Secondary horizontal lines allow precise elevation holds. The standard spacing between the secondary horizontal lines is exactly 1 mil.
• To compensate for wind, drift, speed of target, etc.: each secondary horizontal stadia line is calibrated with "large hash marks" spaced
exactly 1 mil apart; between each of the large hash marks, there are smaller evenly spaced hash marks that are exactly 0.2 mils apart.
• The Horus Grid allows you to quickly and accurately make a Second Shot Correction if your first shot misses.
• Not available with illumination.
KEY FACTS
• Ability to perfectly calibrate wind dots to ballistics of your choice.
• Excellent milling capability with 0.1 mil resolution milling chevrons, allowing extremely fine mil estimation.
• The Tremor4 spotting scope reticle pattern is located below the central viewing area, allowing clear observation, while maintaining
measurement capability.
• Central targeting grid calibrated in USMC mils (6283 mils/circle) (1 mil = 3.60 inches at 100 yards) (10cm at 100 meters).
• Precise calibration of measurements to within less than 0.5%.
Measurements are in mils