Table of Contents
Advertisement
Horus H322™ Spotting Reticle
SPECIFICATIONS
KEY FEATURES
• The H322 reticle is designed to be used with the H58 or H59 riflescope reticle, allowing the shooter and spotter to view a target
with the same common frame of reference.
• Patented Horus Rapid Range Bars, for quickly estimating range to targets of known size. Numbers indicate distance in mils of
specific range bar from the horizontal line beneath it.
• Spotting reticle for observational measurement.
• Mil line across the center of the reticle grid is to facilitate target measurement, target speed estimation, Second Shot Correction,
and to help with target location.
• The H322 is not currently available with illumination.
• Secondary horizontal lines allow precise elevation holds. The standard spacing between the secondary horizontal lines is exactly
1 mil.
• To compensate for wind, drift, speed of target, etc.: each secondary horizontal stadia line is calibrated with "large hash marks"
spaced exactly 1 mil apart; between each of the large hash marks, there are smaller evenly spaced hash marks that are exactly 0.2
mils apart.
• The Horus Grid allows you to quickly and accurately make a Second Shot Correction if your first shot misses.
KEY FACTS
• The H322 spotting scope reticle is located below the central viewing area.
• Central targeting grid calibrated in USMC mils (6283 mils/circle) (1 mil = 3.60 inches at 100 yards) (10cm at 100 meters).
• Precise calibration of measurements to within less than 0.5%.
Advertisement
Table of Contents
