Connect The Dm-Dge-200-C - Crestron DGE-100 Product Manual

Connect the DM-DGE-200-C

Make all necessary connections to the DM-DGE-200-C as shown in the following diagrams.
NOTE: The DM-DGE-200-C does not support PoE (Power over Ethernet) or PoDM (Power
over DM® input) and must be powered by the included power pack.
Top Panel Connections
Bottom Panel Connections
Observe the following when connecting the DM-DGE-200-C:
Use Crestron power supplies for Crestron equipment.
l
Do not extend the included cable.
l
Connect the chassis ground lug to a known earth ground circuit (such as building steel) to
l
ensure that the device is grounded properly.
Apply power after all connections have been made.
l
Product Manual — Doc. 7696D DGE-100 and DM-DGE-200-C • 33