Web Configuration - Crestron DGE-100 Product Manual

Web Configuration

The DGE may be monitored and configured using its web configuration interface. The web
configuration interface is accessible from a web browser via the DGE IP address as described in
Access the Web Configuration Interface on page
NOTE: If authentication is turned on for the DGE, an administrator username and password
must be entered prior to accessing the web configuration interface. For more information,
refer to Turn on Authentication on page
The web configuration opens with the STATUS page is displayed and the General accordion
expanded by default (DM-DGE-200-C shown).
The web configuration interface provides the following selections that can be chosen from the
navigation menu on the left of the page. The menu is always visible with the selected page
highlighted in blue.
STATUS: Used to monitor DGE status.
l
HDMI INPUT: Used to monitor and configure the HDMI® input.
l
DM IN: (DM-DGE-200-C only) Used to monitor and configure the DM® input.
l
HDMI OUTPUT: Used to monitor and configure the HDMI output.
l
NETWORK: Used to configure the DGE network settings.
l
DEVICE: Used to configure DGE device settings.
l
If authentication is turned on, a user profile icon is shown in the top right of the page. Select the
user profile icon to view details about the user and to log out of the web configuration interface.
56 • DGE-100 and DM-DGE-200-C
35.
37.
Product Manual — Doc. 7696D