Service Level 1 - Engine Service, Tbo 4000 Hours For Esp - Engine Operation - Version: 2021-07 - Kohler KD62V12 Operation And Maintenance Manual

Maintenance
Inspection and maintenance schedules
Component
SL008
Tab. 15: Daily maintenance activities — Engine operation - Version: 2020-10-06
5.4.2 Service level 1 — Engine Service, TBO 4000 hours for ESP — Engine
Operation - Version: 2021-07
Component
SL100 Oil sampling
SL120 Coolant sampling
Recommended:
First 250 service
SL122
hours for a new or
overhauled engine
84
Service
Schedule
Type
Month
-
ly
Service
Schedule
Type
100 1Y
- 2Y
250 1Y X
© 2022 by Kohler Co. All rights reserved.
Task description
Test run (if parameters are in the setting range) at
X more than a 1/3 load and at least until steady-state
temperature is reached (monthly).
Task description
Collect and send oil sample for analysis every 100
hours on ESP or 250 hours (in PRP and COP applica‐
tions). If the results are not within the requested
parameters, repeat analysis at shorter intervals. In
X
case of use of high sulfure rate (>0.5%). No oil
Category 1 in case of K175.
see: 5.9.1 Collecting and analyzing oil sample —
SL100, page 111.)
Check coolant quality.
X 5.10.1 Collecting coolant sample — SL120,
page 123.)
Engine oil replacement.
5.9.6 Changing engine oil — SL101, SL121,
page 118.)
Oil filters and oil filters for cooling jet replacement.
(For more information see: 5.9.4 Changing oil filters
— SL101, page 113.)
It is recommended to check the engine oil charac‐
X
teristics at the same time.
see: 5.9.1 Collecting and analyzing oil sample —
SL100, page 111.)
Perform all check before starting and perform a
test run. (For more information see: 5.7.3 Testing
engine in operation (ESP application only) — SL008,
page 104.)
(For more information
(For more information see:
(For more information see:
(For more information
KD62V12 33521030301_8_1 EN_US 2022-09