Samsung QE49Q8 Series Service Manual page 48

„ SVC > Test Patterns
1. Verify "Scaler Pattern" and "US Post Pattern".
2. Verify "FRC Pre Test Pattern".
3. Verify "FRC Post Test Pattern".
4. Verify "SoC TCON Test Pattern".
Factory Mode / Control / EDID (Restoring HDMI Inputs)
1. Remove ALL HDMI connections
2. Factory Mode/Control/EDID
3. Select EDID/OFF to ON (Right Arrow Key)
4. Select EDID WRITE ALL (Enter)
5. Wait to Success (Right Arrow Key)
6. Confirm EDID WRITE ALL
(Press Enter)
Success (Menu Key)
Scaler Pattern
US Post Pattern
FRC Pre Pattern
FRC Post Pattern
SOC TCON Pattern
SOC TCON Pattern Level
FRC OSD Pre Pattern
FRC OSD Post Pattern
FRC2 Pre Pattern
FRC2 Post Pattern
SOC TCON2 Pattern
SOC TCON2 Pattern Level
SOC TCON3 Pattern
SOC TCON3 Pattern Level
EDID
Sub Option
EDID ON/OFF
EDID WRITE ALL
EDID WRITE ALL
EDID WRITE ALL
4. Troubleshooting
OFF
OFF
0
0
0
255
0
0
0
0
0
255
0
255
ON
Success
Wait
Success
4-21