3-3
Disconnect the rear cover
•
First, releasing bottom Hook by gently inserting the OPEN Jig
•
Then, releasing the left bottom corner notch, by fully inserting the OPEN Jig.
Re-position the Jig just far enough in to release the left slide while clearing the
panel.
3-4
Repeat the Process on the right side. Two Open Tools are recommended to help hold open
the cover.
Release both sides then top of cover.
3-5
Now begin lifting off the Rear Cover starting at the top.
NOTE: Lift up cover while gently rocking side to side until center and bottom tabs
9
release.
3. Disassembly and Reassemble
Remark
Remark
Remark
3-3